Age catches up with garage door springs, leading to gradual wear and tear.
The garage is a crucial part of any home, so its significance cannot be taken lightly. The garage door consists of many parts, such as the door opener, springs, and hinges. However, the garage door springs are the most delicate and susceptible to failure or breakage. Garage door spring failure can render the whole garage door useless. Therefore, it is essential to maintain the garage door springs well. Consider why garage door springs break to know how to avoid this catastrophe.
Age catches up with garage door springs, leading to gradual wear and tear. However, wear and tear depends on how often the garage door is used, how regular maintenance is carried out, and the cycle rating of the springs. A torsion spring is rated for an estimated ten thousand cycles in the initial installation. The more frequently a garage door is operated, the higher the chances of failure or breaking the garage door spring.
Since springs are made of steel, they are prone to rusting. Excessive rust accumulation is also a reason garage door springs break. Rust is most common during wetter climates since moisture brings about it. Accumulated rust increases coil friction on the moving spring, on top of being corrosive. Therefore, the higher the rust on the garage door springs, the higher the breakage rate.
It is essential to install two torsion springs for lifting the garage door during garage door installation. However, some people decide to cut costs using one long torsion spring, which is dangerous, as single springs have a shorter lifespan and break easily due to the garage door’s weight. Installing two torsion springs is worth the investment to ensure they are in solid working condition in the long run.
Regular garage door maintenance is essential to increase the lifespan of the springs. The springs need regular lubrication and annual check-ups to identify problems early and prevent mishaps. It’s also essential to inspect and ensure the door is well-balanced. Lack of proper maintenance is the most common reason why springs break.
Every qualified door expert knows that each garage door has a specific spring designed to operate the garage door. Therefore, if the spring installed with a door differs from the specific spring for that door in terms of spring length and wire size, it is more likely to break quickly.
Torsion springs provide over 90% of the lift used to raise a garage door in modern-day garage doors. There are various reasons why garage door springs may break, but these incidents can be avoided with expert installation and materials, proper maintenance, lubrication, and inspection.
Call Quick Response Garage Door Service – We are your Arizona garage door service specialists. Greater Phoenix Area (602) 825-2925
